User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 50 -
4.3.5 Voice Configuration Screen
Click [Voice Configuration] in the navigation panel and open the [Voice Configuration]
Screen.
- Codec Priority: set codecs priority in order. Please notice that user can set from
1 to 5 codecs as their need. For example, user can only set first priority as
G.723.1, and set the others as x, that means only G.723.1 is available.
- Frame Size: User can set different packet size for each codec.
- G.723 Silence Suppression: Enable / Disable sound compression and comfort
noise generation. It is only for codec G.723.1
- Volume: Adjust the volume in “Voice” (sending out); “Input” (receiving); “ DTMF”
(DTMF sending out).
- Echo Cancelor: Enable / Disable (suggested always Enable this function).
- Jitter Buffer: Set Min. Delay and Max. Delay of Jitter Buffer for voice packets.
Note:
Well the application before you change voice parameters, because this might cause
incompatibility.