User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 46 -
4.3.2 SIP Information Screen
Click [SIP Configuration] in the navigation panel and open the SIP Information Screen.
- Run Mode: Select Dynamix DW-01Plus/S to work under Peer-to-Peer mode or
Proxy mode.
- Primary Proxy IP Address: Set primary Proxy IP Address or URL address
(Domain Name Server must be configured. Please refer to Network Interface).
- Secondary Proxy IP Address: Set secondary Proxy IP Address or URL address
(Domain Name Server must be configured. Please refer to Network Interface).
When Dynamix DW-01Plus/S fail to register to primary Proxy, it will try to
register to secondary Proxy, when it fails again, it will retry to register to Primary
Proxy.
- Outbound Proxy: Set IP Address or URL address (Domain Name Server must
be configured. Please refer to Network Configure) of outbound Proxy server.
- Proxy port: Set Proxy port for Dynamix DW-01Plus/S to send message, default
value is 5060, if there is no special request of Proxy server, please don’t change
this value.
- Outbound proxy port: Set outbound Proxy port for Dynamix DW-01Plus/S to
send message, default value is 5060, if there is no special request of Proxy
server, please don’t change this value.
- Prefix String: set prefix string. If user ID contains alphabets, user can set it as
prefix string here. For example, if Account Name is 123, Dynamix DW-01Plus/S
will sent out messages as Account Name @”IP address of Proxy”, if user set