User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 30 -
Note:
With Dynamic WAN IP Address, when the WAN IP is changed, we need to
change the external IP of Dynamix DW-01Plus/S Gateway using above command.
1. Different Vendor’s Router will have different appearance of setting.
2. Once you set the DMZ Host, you don’t need to configure the Port Forwarding and
vice versa.
3. If there is only one Dynamix DW-01Plus/S Gateway attached to the IP Sharing
device, it is recommended to use DMZ Host setting to enable the NAT traverse
and disable the Port Forwarding.
4. If there are two or more sets of Dynamix DW-01Plus/S Gateway attached to the
IP-Sharing device, please configure the Port Redirection (Forwarding) to enable
the NAT traverse and disable the DMZ Host.
5. After the IP Sharing configuration of Dynamix DW-01Plus/S Gateway and IP
Sharing device is complete, you must reboot the Dynamix DW-01Plus/S Gateway
to activate the new settings.