User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 21 -
Note:
1. Please contact with your Proxy vendor to obtain user account information.
2. If no need to enter password, user also has to set security information, please set
“name” the same with line number.
2.1.4.3.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the proxy server.
When in Peer-To-Peer mode, Dynamix DW-01Plus/S Gateway use Phone Book, which
will dial predefined phone number, and press “#” (optional, to accelerate the dial) as end
of dial.
To configure Peer-To-Peer Mode in Dynamix DW-01Plus/S Gateway, follow the steps
below:
Step 1. Set Peer-To-Peer Mode, using “sip” command
usr/config$ sip –mode 0
Mode 0 is for Peer-To-Peer mode, while mode 1 is for Proxy mode.
Step 2. Configure Phone Book, using “pbook” command.
usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10
In this case user add one callee record named as TEST1, IP address as 10.1.1.1, and
mapping e.164 number as 10. After phone book data has been set, user can dial 10 to
make a call for IP 10.1.1.1.
After the command completed, you can type “pbook –print” to see if the input record is
correct.
When adding a record to Phone Book, user does not have to reboot the machine, and
the record will be effective immediately.