User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 15 -
2.1.3.3 Application mode-Proxy/Peer-to-Peer Mode
After setting IP address, user must assign Dynamix DW-01Plus/S to work under Proxy
mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix
DW-01Plus/S as Peer-to-Peer Mode.
2.1.3.3.1 Proxy mode
Proxy mode means that there will be an intermediate Proxy Server between Dynamix
DW-01Plus/S Gateway and the remote entity. While operating at this mode, Dynamix
DW-01plus/S Gateway will first register to the Proxy Server located at the ISP side. For
the following operation, it sends the INVITE message to the Proxy Server once you
initiate a session. Then the Proxy server will forward the INVITE message to the right
place. And the Response message from the remote entity will be forwarded back to you
via Proxy server.
Step 1. Configure the Dynamix DW-01Plus/S Gateway SIP Configuration. Click SIP
Information on the navigation panel. In the SIP Information screen, select Proxy
routed Mode function.
Step 2. Set the SIP information from your service provider: Proxy IP Address, Line1
Number, Line1 Account, Line1 Password, and click the OK button.
Note:
1. Please contact with your Proxy vendor to obtain user account information.
2. If no need to enter password, user also has to set security information, please set
“name” the same with line number.
3. Dynamix DW-01Plus/S Gateway uses “line number” to regist
er to proxy server,
the “name” is only for authentication.