User`s manual

Dynamix DW-01Plus/H Gateway User Manual
- 95 -
disable the request mode sending and 1 for request mode sending with the
T.38.
- t38ecm: Enable or disable t38ecm function. The function is support the error
correction in the high-speed fax mode.
- t38asn1: Enable or disable Enable ASN.1 function. The function is support with
the FAX.
- faxrdd: Set fax redundancy depth. User can increase FAX redundancy depth
when network traffic is heavy. For example, if user set fax redundancy as 2,
Gateway will resend fax packets every 2 packets.
- fstart: Enable or disable fstartStart function. The function is can shorten the
connection time if the opposite party also supports fastStart.
- tunnel: Enable or disable H.245 tunneling function. The function is send H.245
(Call Control messages) via H.225’s (Call Signal messages) link. The function is
effective only when both side support h245 tunnel.
- h245fs: Enable or disable Gateway H.245 FastStart. The function is send h.245
messages after FastStart.
- earlyh245: Enable or disable early H.245 function. The function is effective only
when both sides support early H.245.
- h450: Enable or disable H.450 related features, which include transfer, hold and
forward.
Note:
It is not recommended to change the value in this command, only if users do know
well the application. This might cause incompatibility with other devices.
For example: