User`s manual

Dynamix DW-01Plus/H Gateway User Manual
- 46 -
- RTP Port: The UDP port for the voice sending. RTP ports support a range of
the UDP. The line 1 is using UDP (RTP) 16384 and (RTCP) 16385. The line 2
is using UDP (RTP) 16386 and (RTCP) 16387….etc. This configuration is
defining the start port for the RTP packets. Support the GK and Peer-to-Peer
mode both.
- Gatekeeper finding port: The port for the Gatekeeper Discovering function
of this gateway. Support the GK mode only.
- Gatekeeper RAS Port: The GK registering port of this gateway. Support the
GK mode only.
- H225 RAS Port: The RAS port of this unit. Support the GK mode only.
- H225 Call Signal Port: The Call Signal port of this unit. Support the GK
mode only.
- Destination H225 Call Signal Port: To configure the Call Signal port for the
destination unit. Support the P2P mode only.
- Allocate Port Range Start: To configure the beginning of the ports.
- Allocate Port Range End: To configure the end of the ports.
Note:
The port range is for the H245 TCP port. Please info your vendor if you want to
configure these ports for using.
- Response Timeout: The call will be timed out if the call proceeding message
didn’t received from the remote side. Support the GK mode only.
- Connection Timeout: The call will be timed out if the connect message didn’t
received from the remote side. Support the GK mode only.
- H235 Security Token: Support the H235 security policy for the GK. Support
the GK mode only.