User`s manual

Dynamix DW-01Plus/H Gateway User Manual
- 30 -
3.2 NAT mode (PPPoE)
Step 1. Set PPPoE mode, using [ifaddr –mode 2], input the user id & password
provided by your ISP, using [ifaddr –id –pwd], reboot the device after
disconnection, using [ifaddr –reboot 1]
usr/config$ ifaddr –mode 2
usr/config$ ifaddr –id [e-mail] (PPPoE login account)
usr/config$ ifaddr –pwd 123 (PPPoE login Passowd)
usr/config$ ifaddr –reboot 1 (Enable)
Step 2. Set NAT function (Default NAT function is enable)
usr/config$ ifaddr -nat 1
Step 3. Set DHCP server function (Default DHCP server function is enable)
usr/config$ ifaddr -dhcpsv 1
For example: