User manual

DYNAMIX IP PHONE 530. User Manual
9/49
ITSP if PPPoE setting and the setup are correct.
Notice: If user accesses the IP phone through WAN port. He/She should use the new IP address to
access the IP phone when the WAN port address was changed.
2.3.2 LAN Config
Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its LAN
port in bridge mode and its LAN and WAN port will be in the same network. (This setting won’t take
effect unless you save the config and reboot the device)
IP Netmask: Set the IP and Netmask for the LAN
DHCP Server: Enable DHCP service in LAN port
NAT: Enable NAT.