User manual

DYNAMIX IP PHONE 530. User Manual
8/49
Phone Number public sip and private sip phone numbers.
2.3 Network
2.3.1
Wan Config
WAN port network setting page.
Support static IP, dynamic obtain IP and PPPoE.
VLAN Enable: Enable Vlan
¾ Configure Static IP:
----Enable Static;
----Set DYNAMIX IP PHONE 530’s IP address in the IP Address;
----Set netmask in the Netmask field;
----Set router IP address in the Gateway;
----DNS Domain:
----Set local DNS server in the Preferred DNS and the Alternate DNS
----Auto DNS：DNS select it to get the DNS address automatically
¾ Configure to dynamic obtain IP
----Enable DHCP;
If there is DHCP server in your local network, DYNAMIX IP PHONE 530 will automatically
obtain WAN port network information from your DHCP server.
¾ Configure PPPoE:
----Enable PPPoE
----PPPoE server: Enter “ANY” if no specified from your ITSP.
----Enter PPPoE username and pin in the username and password.
-----Fixed IP: use the fixed IP address
DYNAMIX IP PHONE 530 will automatically obtain WAN port network information from your