User manual

DYNAMIX IP PHONE 530. User Manual
47/49
9.1.8 How to use set the IP type via keypad?
In the idle mode, user may us the keypad to set the IP type as the below procedure:
Keep pressing the button 1 for changing to static mode.
Keep pressing the button 2 for changing to DHCP mode.
Keep pressing the button 3 for changing to PPPoE mode.
9.1.9 VLAN implement
DYNAMIX IP PHONE 530 support rich 802.1Q/P protocol and Diffserv configuration.
Through its flexible VLAN function, you can set the voice/signaling and data packets in
different VLAN via different VLAN id.
Different implement of VLAN function:
1: if “Data/Voice VLAN differentiated” is undifferentiated. Device will set the same
vlan ID for voice and data. As show below
Or
2. if “Data/Voice VLAN differentiated” is Tag differentiated but the DiffServ is disable.
Device won’t distinguish the voice, signaling and data stream. It will add the same data
vlan id to them. As below: