User manual

DYNAMIX IP PHONE 530. User Manual
42/49
8 POST Mode(safe mode)
DYNAMIX IP PHONE 530 provide safe mode. When there is booting problem because of setting
problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to
solve this problem.
How to enter safe mode?
There will be a schedule bar in the DYNAMIX IP PHONE 530 booting procedure, press # key within
the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST
mode. User may change the PC’s IP address to 192.168.10.xx and telnet to 192.168.10.1 to access the
IP phone in POST mode.
User can accord the guide in post mode to clear the settings or upgrade the firmware.