User manual

DYNAMIX IP PHONE 530. User Manual
37/49
Example:<config-pppoe>#auth –user aaa –password 123456
[disable]enable service settings ---[no]service xxx
Show pppoe settings ---show
¾ QOS settings
path:<config-qos>#
[delete]add QoS table entry --- [no]entry –addr x.x.x.x –mask x.x.x.x
Example:<config-qos>#entry –addr 202.112.10.1 –mask 255.255.255.0
[disable]enable include QOS table ---[no]include
Show QoS settings ---show
¾
SIP settings
path:<config-sip>#
[disable]enable registration ---[no] register
[disable]enable auto detect server ---[no] detect-server
Set sip domain ---default-domain xxx
Set DTMF mode ---dtmf-mode xxx
Set auto detect interval time ---interval-time xxx
Set RFC edition ---rfc-version xxx
[disable]enable auto swap server --- [no]swap-server
Set sip account ---number-password –number xxx –password xxx
Set local SIP signal port --- signalport xxx
Set proxy server ---server proxy -ip x.x.x.x _port xxx _user xxx _password
xxx
Example:<config-sip-server># proxy ip 210.25.23.22 _port 5060 _user aaa _password 123456
Set register server info ---server register -ip x.x.x.x _port xxx –user xxx
_password xxx
Set alter proxy info ---alter-server proxy –ip x.x.x.x _port xxx _user xxx
_password xxx
Set alter server info ---alter-server register –ip x.x.x.x _port xxx _user xxx
_password xxx
[disable]enable stun server ---stun [no]enable
Set stun detecting interval time ---stun interval-time xxx
Set stun server ip and port ---stun –ip x.x.x.x –port xxx
Show current sip info ---show
¾ User management
path:<config-user>#
Change user right. ---access –user xxx –access xxx
Example:<config-user>#access –user aaa –access 7
Change user password ---password –user xxx
Add new user ---entry –user xxx –access xxx
Example:<config-user>#entry –user abc –access 7
Delete user entry ---no entry –user xxx
Show current sip info ---show