User manual
DYNAMIX IP PHONE 530. User Manual
34/49
5 Tree Structure
5.1.1 account
path: <account>#
[stop]start Syslog ---syslog [no] start
Configure Syslog server address and port ---syslog server –ip x.x.x.x _port xxx
Example: #<config-account-syslog>#server –ip 202.112.20.10
Show syslog settings ---syslog show
Show all account settings ---show
5.1.2 config
¾ accesslist firewall config
path: <config-accesslist>#
add firewall rule ---entry –I/O xxx –P/D xxx –proto xxx –srcaddr x.x.x.x
–srcmask x.x.x.x–desaddr x.x.x.x –desmask x.x.x.x –portrange xxx –portnum xxx
Example:<config-accesslist>#entry –I/O input –P/D deny –proto udp –straddr 202.112.10.1 –srcmask
255.255.255.0 –desaddr 210.25.132.1 –desmask 255.255.255.0 –portrange neq –portnum 5060
delete firewall rule ---no entry –I/O xxx –index xxx
Example :<config-accesslist>#no entry –I/O input –index 1
Show firewall settings ---show
[disable] enable input filter ---[no]in-access
[disable] enable output filter ---[no]out-access
¾ DHCP
path:<config-dhcp>#
add DHCP rule ---entry –name xxx –startip x.x.x.x –endip x.x.x.x –netmask
x.x.x.x –gateway x.x.x.x –dnsserver x.x.x.x _time xxx
Example:<config-dhcp>#entry –name lan2004 –startip 192.168.1.2 –endip 192.168.1.254 –netmask
255.255.255.0 –gateway 192.168.1.1 –dnsserver 192.168.10.18
delete DHCP rule ---no entry –name xxx
Example: <config-dhcp>#no entry –name lan2004
Show DHCP settings ---show
[disable]enable DNS-relay ---[no]dns-relay
¾ dialrule
path:<config-dialrule>#
[disable] enable End with # ---[no]endchar
Set end with fix length ---fixlen xxx
Disable end with fix length ---no fixlen
Set timeout to send ---timeout-send xxx
Disable timeout to send ---no timeout-send
Add digital map ---entry –prefix xxx –length xxx
Example: <config-dialrule>#entry –prefix 010 –length 11
Delete digital map rule ---no entry –prefix xxx
Example: <config-dialrule>#no entry –prefix 010
Show current digital map ---show
¾ LAN interface settings
path:<config-interface-fastethernet-lan>#
[disable]enable bridge mode ---[no]bridgemode
[disable]enable DHCP service ---[no]dhcp-server
[disable]enable NAT ---[no]nat
Show current DHCP rules ---dhcpshow