User manual

DYNAMIX IP PHONE 530. User Manual
29/49
3 Use keypad configure DYNAMIX IP PHONE 530
3.1 Keypad function
User can configure DYNAMIX IP PHONE 530 through its keypad. List below is the keypad function
Keypad Mode Function/Display
Idle mode ---- show current time
Sysinfo Idle mode circularly show phone number,wan ip, gateway info
Idle mode enter config mode, default password 123 Menu/OK
config mode confirm or enter sub-menu
Exit config mode exit
Calling mode volume up (Max:9) Up
config mode Page up
Calling mode volume down (Min:1) Down
config mode Page down
Calling mode Delete digits Del
config mode Delete digits
Mute Calling mode Mute
Out call Idle mode Outgoing call menu
In call Idle mode Incoming call menu
Record Idle mode Enter record menu, usage refer FAQ
Pbook Idle mode Enter Phone book set up
Handfree Calling mode Handfree
Calling mode Digits 0~9
0－9
config mode Hit quickly to switch between numeric or alphabetic
Calling mode Use in 3-way conference call. *
config mode Use as “.” In the ip address setting
# Calling mode Use as end key of dialing or the dial number
Hold Calling mode Hold, detail refer value add service
FWD Calling mode Transfer, detail refer value add service
Redial Calling mode Redial key
Send Calling mode call key
No.1~No.9 Idle mode Speed dial key