User manual

DYNAMIX IP PHONE 530. User Manual
10/49
2.4 VoIP SIP Config
2.4.1 SIP config
Setting page of public SIP server:
Register Server Addr: Register address of public SIP server
Register Server Port: Register port of public SIP server，default port is 5060
Register Username: Username of your SIP account (Always the same as the phone number)
Register Password: Password of your SIP account.
Proxy Server Addr: IP address of proxy SIP server (SIP provider always use the same IP for
register server and proxy server, in this case you don’t need to configure the proxy server
information. )
Proxy Server Port: Signal port of SIP proxy
Proxy Username: proxy server username
Proxy Password: proxy server password
Domain Realm: SIP domain, enter the sip domain if any, otherwise DYNAMIX IP
PHONE 530 will use the proxy server address as sip domain.
Local SIP port: Local SIP register port, default 5060
Phone Number: Phone number of your SIP account
Display name: config the diaply name , it can be displayed at the callee's side . only letter and
number input is allowed here
Register Expire Time: register expire time, default is 600 seconds. DYNAMIX IP PHONE 530 will
auto configure this expire time to the server recommended setting if it is different from the SIP server.
Detect Interval Time: Co-work with the Auto Detect Server, if Auto Detect Server is enable,
DYNAMIX IP PHONE 530 will periodically detect if the SIP server is available according this
setting.
User Agent:
Encrypt Key: The particular service system decrypts of the key , matching with the server Type
usage, the key provide by the particular service system supplier, default is empty