User manual

ManualsBrandsDynamix ManualsComputer equipment530

DYNAMIX IP PHONE 530. User Manual

1/49

DYNAMIX IP PHONE 530

User Manual

Summary of content (49 pages)

PAGE 1
DYNAMIX IP PHONE 530.
PAGE 2
DYNAMIX IP PHONE 530. User Manual 1 DYNAMIX IP PHONE 530 Features.......................................................................... 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 Web Configuration....................................................................................................... 6 2.1 2.2 2.3 2.3.1 2.3.2 2.4 2.5 2.6 2.7 2.8 2.9 3 Keypad function ................................................................................................................ 29 Keypad Menu........
PAGE 3
DYNAMIX IP PHONE 530. User Manual 8 9 POST Mode(safe mode) ............................................................................................ 42 FAQ............................................................................................................................ 43 9.1.1 9.1.2 9.1.3 9.1.4 9.1.5 9.1.6 9.1.7 9.1.8 9.1.9 How many servers may Dynamix IP phone 530 register simultaneously? ........... 43 Why the settings vanish after reboot? .................................................
PAGE 4
DYNAMIX IP PHONE 530. User Manual 1 DYNAMIX IP PHONE 530 Features 1.1 Appearance 1.2 Interface Power: WAN: LAN: 1.3 Output Power:12VDC,500mA. RJ45 port. RJ45 port. Electricity characteristic z z 1.4 Speciality of electric: output the 12V 500mA DC The network connects:2 RJ45 connect, a WAN, a LAN Software z z z z z z z Support two sip accounts at the same time. Redundancies server support. NAT, Firewall. DHCP client and server. Support PPPoE, (used for ADSL, cable modem connecting).
PAGE 5
DYNAMIX IP PHONE 530. User Manual z z z z z z z z z z z z z 1.5 G.168 compliant 32ms echo cancellation Tone generation and Local DTMF re-generation according with ITU-T E.164 dial plan and customized dial rules Hotline. Speed Dial Call Forward, Call Transfer, 3-way conference calls Record Caller ID display DND(Do Not Disturb),Black List,Limit List Upgrade firmware through FTP, TFTP or HTTP,. Web management. Telnet remote management.
PAGE 6
DYNAMIX IP PHONE 530. User Manual 1.8 Package z z 1.9 Size: 338×220×85mm Packing List 9 DYNAMIX IP PHONE 530 9 Power adaptor (out put 12v ,500mA) 9 Manual CD Installation Use ethernet cable to connect DYNAMIX IP PHONE 530’s LAN port and your computer. Set your computer’s ip to the network 192.168.10.x or using dynamic obtain IP. Open your web browser and key in 192.168.10.1.
PAGE 7
DYNAMIX IP PHONE 530. User Manual 2.2 Current state This page shows DYNAMIX IP PHONE 530’s running state. Network shows the WAN and LAN port connecting state and current settings.
PAGE 8
DYNAMIX IP PHONE 530. User Manual Phone Number public sip and private sip phone numbers. 2.3 Network Wan Config 2.3.1 WAN port network setting page. Support static IP, dynamic obtain IP and PPPoE.
PAGE 9
DYNAMIX IP PHONE 530. User Manual ITSP if PPPoE setting and the setup are correct. Notice: If user accesses the IP phone through WAN port. He/She should use the new IP address to access the IP phone when the WAN port address was changed. 2.3.2 LAN Config Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network.
PAGE 10
DYNAMIX IP PHONE 530. User Manual 2.4 2.4.1 VoIP SIP Config SIP config Setting page of public SIP server: Register Server Addr: Register address of public SIP server Register Server Port: Register port of public SIP server，default port is 5060 Register Username: Username of your SIP account (Always the same as the phone number) Register Password: Password of your SIP account.
PAGE 11
DYNAMIX IP PHONE 530. User Manual Server Type：The particular service system supplier carries out the sign and speeches to encrypt, default is common DTMF Mode: DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio) and SIP info RFC Protocol Edition: Current DYNAMIX IP PHONE 530 SIP version. Set to RFC 2543 if the gate need to communicate to devices (such as CISCO5300) using the SIP 1.0. Default is RFC 3261. Enable Register: Enable/Disable SIP register.
PAGE 12
DYNAMIX IP PHONE 530. User Manual Enable G.729: Using G.729 speech coding mandatory consultations 2.5 Advance 2.5.1 DHCP Server DHCP server manage page. User may trace and modify DHCP server information in this page. DNS Relay: enable DNS relay function. User may use below setting to add a new lease table. Lease Table Name: Lease table name. Lease Time: DHCP server lease time. Start IP: Start IP of lease table. End IP: End IP of lease table.
PAGE 13
DYNAMIX IP PHONE 530. User Manual 2.5.2 NAT Advance NAT setting. Maximum 10 items for TCP and UDP port mapping. IPSec ALG: Enable/Disable IPSec ALG; FTP ALG: Enable/Disable FTP ALG; PPTP ALG: Enable/Disable PPTP ALG; Transfer Type: Transfer type using port mapping. Inside IP: LAN device IP for port mapping. Inside Port: LAN device port for port mapping. Outside Port: WAN port for port mapping. Click Add to add new port mapping item and Delete to delete current port mapping item.
PAGE 14
DYNAMIX IP PHONE 530. User Manual 2.5.3 Net Service HTTP Port: configure HTTP transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.xxx.xxx.xxx:xxxx/ to reconnect. Telnet Port: configure telnet transfer port, default is 23. RTP Initial Port: RTP initial port. RTP Port Quantity: Maximum RTP port quantity, default is 200 Notice: Settings in this page won’t take effect unless save and reboot the device.
PAGE 15
DYNAMIX IP PHONE 530. User Manual 2.5.4 Firewall settings Firewall setting page. User may set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices to access the internet. Access list support two type limits: input_access limit or output_access limit. Each type support 10 items maximum. DYNAMIX IP PHONE 530 firewall filter is base WAN port.
PAGE 16
DYNAMIX IP PHONE 530. User Manual 2.5.5 QoS settings DYNAMIX IP PHONE 530 IP phone implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. DYNAMIX IP PHONE 530 will sorted the packets using the QoS and sends it to the destination. 1. Voice 802.1p Priority --- Configure the priority of the voice packets in 802.1p protocol. 2. VLAN Enable --- Disable/Enable VLAN function 3. Voice VLAN ID --- configure the Voice/signaling VLAN ID 4.
PAGE 17
DYNAMIX IP PHONE 530. User Manual 2.5.6 Advance SIP settings This page is used to set the private sip server, stun server, and back up sip server information. STUN Server setting: STUN Server Addr: configure stun server address; STUN Server Port: configure stun server port default 3478 STUN Effect Time: stun detect NAT type circle, unit: minute. Enable SIP STUN: enable/disable stun.
PAGE 18
DYNAMIX IP PHONE 530. User Manual original address but not the address in via field Enable Quote Name: To work with the server , config here to use quotation mark to include the displayname Enable Subscibe: subscribe the message such as other side's status or the voice mail after successful registration 2.5.7 Digital Map Digit map is a set of rules to determine when the user has finished dialing.
PAGE 19
DYNAMIX IP PHONE 530.
PAGE 20
DYNAMIX IP PHONE 530. User Manual 2.5.8 Call Service Settings User configure the value add service such as hotline, call forward, call transfer, 3-way conference call .etc in this page Hotline: configure hotline number. DYNAMIX IP PHONE 530 immediately dials this number after hook-off if it is set. Call Forward: Please refer to Value_add_service for detail. No Disturb: DND, do not disturb, enable this option to refuse any calls. Ban Outgoing: Enable this to ban outgoing calls.
PAGE 21
DYNAMIX IP PHONE 530. User Manual Remote Record No: Config the recording number , if you upload your recording to this account , you can login this account to get your voice recording Black List: incoming call in these phone numbers will be refused.
PAGE 22
DYNAMIX IP PHONE 530. User Manual 2.5.9 MMI Filter MMI filter is used to make access limit to DYNAMIX IP PHONE 530 IP phone. When MMI filter is enable. Only IP address within the start IP and end IP can access DYNAMIX IP PHONE 530 IP phone. 2.5.10 Audio Settings CODEC: select the prefer CODEC; support ulaw, alaw,G729 and G7231 5.3/6.3 Signal Standard: Signal standard for different area. Input Volume: Handset in volume. Output Volume: Handset out volume.
PAGE 23
DYNAMIX IP PHONE 530. User Manual 2.5.11 VPN this page is VPN setting page , the IP phone support the VPN with UDP and L2TP protocol .The parameters is as below VPN IP： After VPN registered successfully, VPN server will give an IP aggress to the terminal . If there is a IP address shown on terminal (except for 0.0.0.
PAGE 24
DYNAMIX IP PHONE 530. User Manual 2.5.12 Memory Key the configuration of 9 speed call buttons 2.6 Dial-Peer Please refer to How to use dial rule for detail.
PAGE 25
DYNAMIX IP PHONE 530. User Manual 2.7 Config Manage Save Config: save current settings. Clear Config: restore to default settings. Backup Config: Backup the config file, via point the right key of mouse-Æ save target as….-Æwill pop a save window, then type the config file name in the File name(the file type is text file) Notice: clear config in admin mode, all settings restores to factory default; clear config in guest modem, all settings except sip, advance sip restore to factory default. 2.
PAGE 26
DYNAMIX IP PHONE 530. User Manual Current Version: the system will display the current version number 。 Server Address: FTP/TFTP server address Username: FTP server user name Password: FTP server password Config File Name: The name of configuration file Config Encrypt Key: The encrypt key of confirmation file Protocol Type: The protocol type that used for upgrading Update Interval Time: The interval time that the terminals search for new configuration file.
PAGE 27
DYNAMIX IP PHONE 530. User Manual 2.9 System Manage 2.9.1 Account Manage Set web access account or keypad password of DYNAMIX IP PHONE 530. 2.9.2 Phone Book: User may set contacts in this page, and the contacts will be saved in the memory. Then using the Pbook, Vol+,Vol-,Menu/OK and Exit keys to choose your friend in the contacts and then press # to call out. 2.9.
PAGE 28
DYNAMIX IP PHONE 530. User Manual 2.9.4 Time Set: Server:type the ip address of time server Timezone:select correct time zone in list box Timeout: longest response time for SNTP Manual Timeset:The time setting Daylight:Daylight saving time 2.9.5 Reboot: Reboot IP phone, some setting needs to reboot to make it works. Please always save config before reboot, otherwise the setting will return to previous setting.
PAGE 29
DYNAMIX IP PHONE 530. User Manual 3 Use keypad configure DYNAMIX IP PHONE 530 3.1 Keypad function User can configure DYNAMIX IP PHONE 530 through its keypad.
PAGE 30
DYNAMIX IP PHONE 530. User Manual 3.2 Keypad Menu User may use SET, Menu/ok, Exit, Vol+, Vol- to config DYNAMIX IP PHONE 530 detail setting. Press Menu/ok to enter config mode, and the default password is 123. Below list the keypad menu of DYNAMIX IP PHONE 530 DYNAMIX IP PHONE 530 Keypad Menu Level 1 Network Level 2 LAN Level 3 Bridge Mode IP Netmask DHCP Server NAT Level 4 Switch FTPalg IPSec alg PPTPalg WAN Status Static Net 1. IP 2. NetMask 3. Gateway 4. DNS 5.
PAGE 31
DYNAMIX IP PHONE 530. User Manual Call-Transfer Call-Waiting Call-Forward Condition SIP Transfer Num Transfer IP Port Dial-Rule End With # Fixed Length Switch Length SIP Reg Status Public Reg Private Reg Detect-server Dtmf-mode Interval-time Swap-server RFC-version Signal-Port Stun Switch Addr Port Expire Time DSP Codec Handdown-time Dtmf-Volume Input-volume Output-Volume Other Setting Syslog Switch Server-IP Server-Port 4. System 1. Save 2. Reboot 3.
PAGE 32
DYNAMIX IP PHONE 530. User Manual 4 Telnet Console 4.1 Introduce 4.1.1 Basic structure User may use telnet command to access and manage IP phone. DYNAMIX IP PHONE 530 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local command under current node. Besides local command, there are some global commands can be used in each node. 4.1.2 Basic command Logout: exit telnet mode. Write: save current settings.
PAGE 33
DYNAMIX IP PHONE 530. User Manual 4.
PAGE 34
DYNAMIX IP PHONE 530. User Manual 5 Tree Structure 5.1.1 account path: # [stop]start Syslog ---syslog [no] start Configure Syslog server address and port ---syslog server –ip x.x.x.x _port xxx Example: ##server –ip 202.112.20.10 Show syslog settings ---syslog show Show all account settings ---show ¾ 5.1.2 config accesslist firewall config path: # add firewall rule ---entry –I/O xxx –P/D xxx –proto xxx –srcaddr x.x.x.x –srcmask x.x.x.x–desaddr x.x.x.
PAGE 35
DYNAMIX IP PHONE 530. User Manual Show LAN port IP address ---ipshow Show NAT info ---natshow Change LAN port IP address ---ip –addr x.x.x.x –mask x.x.x.x Example:#ip –addr 192.168.1.10 –mask 255.255.255.0 ¾ WAN interface settings path:# [disable]enable dhcp client ---[no]dhcp [disable]enable pppoe ---[no]pppoe [disable]enable QOS ---[no]qos Set default gateway IP ---gateway x.x.x.
PAGE 36
DYNAMIX IP PHONE 530. User Manual ¾ Dial-peer settings path:# [disable]enable calling through GK and proxy ---[no]enableGKandProxy Add number-IP bond entry ---entry –number xxx –ip x.x.x.x –protocol xxx Example:#entry –number 100 –ip 202.112.20.100 –protocol sip Add number-IP bond and add prefix to the dial number ---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx Example:#entry –number 100 –ip 202.112.20.
PAGE 37
DYNAMIX IP PHONE 530. User Manual Example:#auth –user aaa –password 123456 [disable]enable service settings ---[no]service xxx Show pppoe settings ---show ¾ QOS settings path:# [delete]add QoS table entry --- [no]entry –addr x.x.x.x –mask x.x.x.x Example:#entry –addr 202.112.10.1 –mask 255.255.255.
PAGE 38
DYNAMIX IP PHONE 530. User Manual 5.1.3 Debug (Level 0~7) path:# show debug setting [disable]enable debug all modules [disable]enable debug app module [disable]enable debug cdr module [disable]enable debug sip module [disable]enable debug tel module [disable]enable debug dsp module ---show ---[no] all xxx ---[no] app xxx ---[no] cdr xxx ---[no] sip xxx ---[no] tel xxx ---[no] dsp xxx 5.1.4 download configure to flash usage: #download tftp –ip x.x.x.
PAGE 39
DYNAMIX IP PHONE 530. User Manual show LAN info Example:##interface fastethernet lan show WAN info Example:##interface fastethernet wan ¾ ip path:# show arp table info Example:##ip arp Show DNS server info Example:##ip dns Show netstate info Example:##ip netstat Show route info Example:##ip route Show icmp packets Stat. Example:##ip icmp Show igmp packets Stat. Example:##ip igmp Show ip packets Stat. Example:##ip ip Show RTP packets Stat.
PAGE 40
DYNAMIX IP PHONE 530. User Manual Example:## pppoe ¾ qos path:# show QoS table info Example:##qos ¾ sip path:# show sip info Example:##sip ¾ udptunnel path:# show UDP tunnel info Example:## udptunnel ¾ uptime path:# show running time Example:## uptime ¾ version path:# show IP phone version Example:## version 5.1.8 telnet and logout Usage: #telnet –target -port Login:xxx Password:xxx # #logout 5.1.
PAGE 41
DYNAMIX IP PHONE 530. User Manual Command ping tracert show basic show ip route show ip arp show ip netstat telnet 7 Function Check if the destination is accessible Show network path info Show network settings Show route table Show arp table Netstat programe Telnet to another device Example #ping www.google.com #tracert www.google.com #show basic #show ip route #show ip arp #show ip netstat #telnet 192.168.1.
PAGE 42
DYNAMIX IP PHONE 530. User Manual 8 POST Mode(safe mode) DYNAMIX IP PHONE 530 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem. How to enter safe mode? There will be a schedule bar in the DYNAMIX IP PHONE 530 booting procedure, press # key within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode.
PAGE 43
DYNAMIX IP PHONE 530. User Manual 9 FAQ 9.1.1 How many servers may DYNAMIX IP PHONE 530 register simultaneously? DYNAMIX IP PHONE 530 is able to register two SIP servers simultaneously, and redundancy servers. User can configure the dial peer to route calls between these servers. Please refer “How to use the dial rule?” for detail. 9.1.2 Why the settings vanish after reboot? Please go to Config ManageÆSave Config to save your setting always. 9.1.
PAGE 44
DYNAMIX IP PHONE 530. User Manual 2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private SIP server. 3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public SIP server. 123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function. 0T rule: If the calls is begin with 0, the first 0 will be replace by 86.
PAGE 45
DYNAMIX IP PHONE 530. User Manual ¾ Call Forward: ----Forward when busy: select Busy in the Call Forward Field, and Key in the destination phone number in the Forward Number. If some one calls you when you having a call, the caller will be forwarded to the destination number. ----Forward no answer: Select No Answer in the Call Forward Field, and Key in the destination phone number in the Forward Number, fill the time in the No Answer Time.
PAGE 46
DYNAMIX IP PHONE 530. User Manual 9.1.7 How to use the record function? DYNAMIX IP PHONE 530 provides record function. With this function, user may record three VoIP message and one local message. Active answering machine: Select “Enable Voice Record” to active answering machine, and config No Answer Time. If there is an incoming call and no one answer the call. After timeout, DYNAMIX IP PHONE 530 will auto answer this call and ask the caller to leave message.
PAGE 47
DYNAMIX IP PHONE 530. User Manual 9.1.8 How to use set the IP type via keypad? In the idle mode, user may us the keypad to set the IP type as the below procedure: Keep pressing the button 1 for changing to static mode. Keep pressing the button 2 for changing to DHCP mode. Keep pressing the button 3 for changing to PPPoE mode. 9.1.9 VLAN implement DYNAMIX IP PHONE 530 support rich 802.1Q/P protocol and Diffserv configuration.
PAGE 48
DYNAMIX IP PHONE 530. User Manual Or 3. if “Data/Voice VLAN differentiated” is Tag differentiated and diffServ are both enable. Then device will distinguish the voice, signaling and data stream to VLAN ID setting.
PAGE 49
DYNAMIX IP PHONE 530. User Manual 4.if “Data/Voice VLAN differentiated” is Date untaged and diffServ are both enable. Then device will undistinguish the date to VLAN ID setting. As below: 5. if VLAN is disable. Device won’t add any vlan ID to the stream. In this case, if the Diffserv is enable, the DiffServ value response to the voice/signaling stream. 6. When VLAN function is enable.