User manual

DYNAMIX IP PHONE 510. User manual
30 / 32
within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1
in POST mode. User may change the PC’s IP address to 192.168.10.xx and telnet to 192.168.10.1
to access the IP phone in POST mode.
User can accord the guide in post mode to clear the settings or upgrade the firmware
V、 FAQ
1. Why the settings vanish after reboot?
Please go to Config ManageÆSave Config to save your setting always.
2. How to use the dial rule?
9 DYNAMIX IP PHONE 510 provide flexible dial rule, with different dial-rule configure, user
can easily implement the following function:
¾ Replace, delete or add prefix of the dial number.
¾ Make direct IP to IP call
¾ Place the call to different servers according the prefix.
9 You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule:
9 Phone Number: The Number suit for this dial rule, can be set as full match or prefix match.
Full match means that if the number user dialed is completely the same as this number, the
call will use this dial-rule. Prefix match means that if prefix of the number that the user dials
is the same as the prefix, the call will use this dial-rule, to distinguish from the full match
case, you need to add “T” after the prefix number in the phone number setting.
9 Call Mode: support SIP..
9 Destination (optional): call destination, can be IP or domain. Default is 0.0.0.0, in this case
the call will be routed to the Public SIP server. If you set the destination to 255.255.255.255,
then the call will be routed to the private SIP server. Also you can key other address here to
make direct IP calls
9 Port (optional): Configure the port of the destination, default is 5060 in SIP
9 Alias (optional):Set up the Alias. We support four Alias as below. Alias need to co-work with
the Del Length:
¾ add:xxx, add prefix to the phone number, can set to reduce the dial length.
¾ all: xxx, replace the phone number with the xxx, can use as speed dial function.
¾ del, delete the first N numbers. N is set in the Del Length
¾ rep:xxx，replace the first N numbers. N is set in the Del Length. For Example: Use wants
to place a call 8610-62281493, then you can set the phone number in the dial rule as 010T, and set
the Alias as rep:8610, and set the Del Length to 3. Then all calls begin with 010 will be changed to