User manual

DYNAMIX IP PHONE 510. User manual

13 / 32

9 Transport Protocol: choose TCP/UDP

9 Subscribe Expire Time: Subscribe information packet Expire Time:

9 Conference Number: config certain Conference call number

9 Signal Encode: enable signal encryption

9 Rtp Encode: enable voice data encryption

9 Enable Session Timer: enable rfc4028 to refresh the SIP sessions

9 Answer With Single Codec: only answer the call with a certain Codec

9 Auto TCP: enable TCP transmission protocol when the length of message exceed 1300 byte

9 Enable URI Convert: convert # into %23 when sending URI

3.2、 Iax2 Config

9 Above is the IAX server configuration page

9 IAX Server Addr: Register address of public IAX server

9 IAX Server Port: Register port of public IAX server，default port is 4569

9 Account Name: Username of your SIP account (Always the same as the phone number)

9 Account Password: Password of your IAX account.

9 Local port: Signal port of local, default port is 4569

9 Phone Number: Phone number of your IAX account

9 Voice mail number: If the IAX support voice mail, but your username of the voice mail is

letters which you can not input with the ATA , then you use the number to stand for your

username

9 Voice mail text: if IAX support voice mail, config the domain name of your mail box here.

9 Echo test number: If the platform support echo test , and the number is test form , the config

the test number to replace the text format The echo test is to test the woring status of

terminals and platform