User`s manual

Intelligent 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver. A.1

You can set new value for STP parameter

Parameter Description

Priority

You can change priority value, A value used to identify the root bridge. The bridge

with the lowest value has the highest priority and is selected as the root. Enter a

number 1 through 65535.

Max Age

You can change Max Age value, The number of seconds a bridge waits without

receiving Spanning-Tree Protocol configuration messages before attempting a

reconfiguration. Enter a number 6 through 40.

Hello Time

You can change Hello time value, the number of seconds between the

transmissions of Spanning-Tree Protocol configuration messages. Enter a

number 1 through 10.

Forward

Delay time

You can change forward delay time, The number of seconds a port waits before

changing from its Spanning-Tree Protocol learning and listening states to the

forwarding state. Enter a number 4 through 30.