User`s manual

Intelligent 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver. A.1

4.4.8 Spanning Tree

The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding loops in switched networks.

When STP enabled, to ensure that only one path at a time is active between any two nodes on the network.

You can enable Spanning-Tree Protocol on web management’s switch setting advanced item, select enable

Spanning-Tree protocol. We are recommended that you enable STP on all 24 ports VDSL IP DSLAM to ensure a

single active path on the network.

You can view spanning tree information about the Root Bridge.

You can view spanning tree status about the switch as the following screen.