User`s manual

Intelligent 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver. A.1

802.1Q VLAN

This page, user can create Tag-based VLAN, and enable or disable GVRP protocol.

There are 256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the switch belong to default

VLAN, VID is 1. The default VLAN can’t be deleted.

GVRP (GARP [Generic Attribute Registration Protocol] VLAN Registration Protocol)

GVRP allows automatic VLAN configuration between the switch and nodes. If the 24 ports VDSL IP DSLAM is

connected to a device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the 24

ports VDSL IP DSLAM, the 24 ports VDSL IP DSLAM will automatically add that device to the existing VLAN.