User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
96
Protocol Enable Setting: (Figure 4.68)
Item Description
Enable Spanning Tree Protocol:
Default recommends enable STP
Enable Internet Group Multicast Protocol:
Default recommends enable IGMP protocol
Enable Manage VDSL Switch from VDSL Ports:
Enable manage VDSL IPDSLAM from port 1~8
VLAN Operation Mode:
No VLAN
802.1Q(Tagging Based) without GVRP
802.1Q(Tagging Based) with GVRP
Port Based VLAN
Auto Speed SNR Margin Maximun Value setup:
Auto Speed SNR Margin Maximun Value must be 35 ~ 50
Figure 4.68 Protocol Enable Setting
Tip:
GVRP (GARP [Generic Attribute Registration Protocol] VLAN Registration Protocol)
GVRP allows automatic VLAN configuration between the NVF-800S and nodes. If the NVF-800S is connected to a
device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the NVF-800S, the
NVF-800S will automatically add that device to the existing VLAN.