User`s manual
NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL
Ver_B.2
88
4.2.2.2 Port Status
1. This page can see the status of every port. (Figure 4.62)
Item Description
State:
Display port status enable or disable state, where enable is link port and disable is no link port.
Config:
Display the user setup setting On when enable and Off when disable.
Actual:
Display the negotiation result.
Link Status:
Down is “No Link”, Up is “Link”
Auto Negotiation:
NVF-800S auto negotiation mode
Configure:
Display the user setup of auto negotiation mode.
Actual:
Display the negotiation result.
Speed status:
Port 9、10 are 10/100/1000Mbps or and Port 1- 8 are 5/15/25Mbps.
Configure:
Display the state of user setup.
Actual:
Display the negotiation result.
Duplex status:
Display full-duplex or half-duplex mode.
Configure:
Display the user setup.
Actual:
Display the negotiation result.
Flow control:
Display flow control status enable or disable mode.
Configure:
Display the user setup.
Actual:
Display the negotiation result.