User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
85
4.2 Remote Network Management
4.2.1 IP Setting
Setup the “IP Address” with the local serial console port (RS-232 Port) then use this IP address to control the VDSL IP
DSLAM by Telnet and WEB. Then use the default IP address to control this VDSL IP DSLAM.
1. Remote control by “Telnet”
To enter Telnet, type the IP address of the NVF-800S to connect management system then type User name and
Password.
Default User Name: admin
Default Password: 123
Note:
1. For security reason, we limit the user login number on Telnet and Console port. So you can’t login Telnet and
Console port at the same time. But you can login Telnet and Console port at the different time.
2. WEB Login doesn’t limit user login numbers.
When you want to close console port control you must log-out to leave. Otherwise you can’t login by Telnet.
2. Network control by “WEB”