User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
66
4.1.1.3.1.3 Perport Configuration
Configure the STP per port configuration. Default pathcost is 10 and priority is 128. (Figure 4.41)
Item Description
Port:
Shows the port number of NVF-800S VDSL IP DSLAM.
PortState:
Shows the condition of the port if it is enabled or disabled.
PathCost:
Specifies the path cost of the port that switch uses to determine which port are the forwarding ports the lowest
number is forwarding ports, the rage is 1-65535 and default value base on IEEE802.1D 10Mb/s = 50-600 100Mb/s =
10-60 1000Mb/s = 3-10
Priority:
You can make it more or less likely to become the root port, the range is from 0 to 255,default setting is 128, the
lowest number has the highest priority.
Figure 4.41 STP Port Configuration