User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
64
4.1.1.3.1.1 STP Enable
The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1d ) for used to prevent forwarding loops on a LAN. When
STP enabled, to ensure that only one path at a time is active between any two nodes on the network. (Figure 4.39)
We are recommended that you enable STP on all switches ensures a single active path on the network.
Item Description
STP:
Spanning Tree Protocol can either be enabled or disabled.
Figure 4.39 STP Enable / Disable