User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
4
The 4-Band VDSL IP DSLAM provides the important features necessary for robust networks:
Class of Service:
802.1p CoS support. Provides high-and low-priority queuing on a per-port basis.
IGMP Snooping:
By 1K IP multicast table for VOD (Video on demand) and video confe
rence and internet
games application.
Scalability:
Up to 5/15/25 Mbps symmetric performance over single-
pair wiring. Fast Ether Channel
port aggregation.
Security:
802.1Q Tagging-based and 802.1V protocol-based virtual local-area network (VLAN)
support. Private VLAN
access, assuring port security without requiring a VLAN per port,
and also supports MAC filtering.
In band Management:
NVF-800S provides a console port for setup IP or other function.
Out of band Management:
NVF-800S supports remote control by Telnet and Web-based. Management easy-to-use
configuration and ongoing monitoring. This software is embedded in the VDSL
NVF-800S and delivers remote, intuitive management of NVF-800S and connected
VDSL CPE devices through a single IP address. NVF-800S are easy-to-configure and
deploy, and offer a compelling option in terms of cost, performance, scalability and
services compared to traditional ATM-based xDSL solutions.
IEEE-802.1d Spanning tree:
This function is for MAC bridge to avoid port loop and link redundant.
IEEE-802.3ad port trunking:
Namely link aggregation
Port Mirroring:
This function could be mirroring and duplicate client side action as E-Mail, but need to be
with mirroring AP as Session Wall or others.
Broadcast storm filtering:
This function is to avoid connecting node too much to cause broadcast storm.
TFTP protocol:
This function is for remote firmware upgrade and remote setup value backup and
restore.