User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
25
Chapter 4. Management Configuration
4.1 In-Band Management
Console port (RS-232) Configuration
Configure the unit with the local serial console port, if one of the RJ11 port is not in use, you can disable it by connecting a
notebook computer to the RS-232 port, then boot with windows OS system and launch “Hyperterminal” program into
terminal window. Setup steps are as follow: (Figure 4.1)
Figure 4.1 COM1 Properties
1. Set “Bits per second” at 9600 to the content window.
2. Set “Flow control” at None