User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
115
Item Description
Priority:
To change priority value. A value must be used to identify the root bridge. The bridge with the lowest
value has the highest priority and is selected as the root. Value ranges from 1 to 65535.
Max Age:
To change Max Age value. The number of seconds a bridge waits without receiving. Spanning Tree
Protocol configuration messages before attempting a reconfiguration. Value ranges from 6 to 40.
Hello Time:
To change Hello time value. The number of seconds between the transmit time of Spanning Tree
Protocol configuration messages. Value ranges from 1 to 10.
Forward
Delay time:
To change forward delay time. The number of seconds a port waits before changing from its Spanning
Tree Protocol learning and listening states to the forwarding state. Value ranges from 4 to 30.
4. Spanning tree status can be viewed at the NVF-800S STP Port Status. (Figure 4.83)
Figure 4.83 STP port status