User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
106
permanently forward traffic, regardless of the device network activity.
4. In the Port Number box, select a port number.
5. If tag-based (IEEE 802.1Q) VLANs are set up on the NVF-800S, static addresses are associated with individual VLANs.
Type the VID (tag-based VLANs) associated with the MAC address.
6. Click “add”
4.2.2.4.6.3 Port Security
A port in security mode will be “locked” without permission of address learning. Only the incoming packets with Static MAC
already existing in the address table can be forwarded normally. User can disable the port from learning any new MAC
addresses, then use the static MAC addresses screen to define a list of MAC addresses that can use the secure port.
Enter the settings then click apply to save the changes. (Figure 4.75)
Figure 4.75 Port Security