User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
102
4.2.2.4.5.3 State Activity
Item Description
Active (select):
The port automatically sends LACP protocol packets.
Passive (no select):
The port does not automatically sends LACP protocol packets and responds only if it receives
LACP protocol packets from the opposite device.
Tip: (Figure 4.72)
1. A link having either two active LACP ports or one active port can perform dynamic LACP trunking. A link has two
passive LACP ports will not perform dynamic LACP trunking because both ports are waiting for LACP protocol
packet from the opposite device.
2. If one is an active LACP’s actor, when one should select trunking port, the active status will be created automatically.
Figure 4.72 Trunking(State Activity)