User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver_B.2
101
4.2.2.4.5.2 Aggregator Information
When you are setting LACP aggregator, you can see relation information in here.
Setup LACP example:
1. LACP: Enable. (One can configure LACP Active/Passive status in each port.)
2. Work ports: 2(use 2 work ports)
3. Select the ports to join the trunking group: Port1 & Port2
4. Click Apply.
5. You can see the configuration shown at the aggregator information. (Figure 4.71)
Figure 4.71 Trunking(Aggregator information)