User`s guide

Connecting the RJ-11/RJ-45 Ports
1.The Modem’s RJ-11 ports support the transmission of data up to 10Mbps across existing phone wiring, without interfering with
standard voice transmissions, easy-to-use does not require the installation of any additional wiring. Every RJ-11 modular phone
jack in the home can become a port on the LAN. Networking devices can be installed on a single telephone wire that can span
within 1.9KM (6000 feet) between the two farthest points. (Figure 1.0).
2. VDSL Modem has embedded Splitter between every VDSL side (Line) and POTS (Phone) side. It permit you can delivers
broadband service on the same lines as Plain Old Telephone Service (POTS), PBX, ISDN traffic and VDSL Signal.
Figure 1.0 Modem use as adapter to connect RJ-11 and the LAN card inside the PC
Phone wiring
To telephone or FAX or
ISDN modem
To VDSL CO
(VDSL CO IP DSLAM or CO Modem)
10/100 Fast Ethernet Networking
Interface Card
7