User`s guide

2.Installing the Modem
Hardware Installation
This chapter describes how to install the Modem and establishes network connections. You may install the Modem on any level surface (e.q, a
table or shelf). However, please take note of the following minimum site requirements before you begin. Stick the 4 plastic feet at the bottom.
Pre-installation Requirements
Before you start actual hardware installation, make sure you can provide the right operating environment, including power
requirements, sufficient physical space, and proximity to other network devices that are to be connected.
Verify the following installation requirement:
• Power requirements: DC5V/1A or above.
• The Modem should be located in a cool dry place, with at least 10cm/4in of space at the front and back for ventilation.
• Place the Modem out of direct sunlight, and away from heat sources or areas with a high amount of electromagnetic
interference.
• Check if network cables and connectors needed for installation are available.
5