User`s guide

Appendix DLink Recover Procedures

Operating Procedures:

1. Power on VDSL CO, start the speed change program, change speed mode to 4/1Mbps.

2. Connect phone line between VDSL CO & VDSL CPE.

3. Push still Link Recover Button of VDSL CPE and power on VDSL CPE.

4. Wait for 5 seconds, then release Link Recover Button.

5. Now, VDSL CPE speed mode has changed to 4/1Mbps mode, wait until VDSL CO & VDSL CPE establish link {You can see that

both VDSL LEDs(CO & CPE) are steadily on}.

6. Run speed change program, you can set your desired speed mode.

Remark: LWD represents 4/1Mbps.