User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver.A.3
Return to the catalogue.
51
3. You can set new value for STP parameter, then click set Apply button to modify.
Parameter Description
Priority
You can change priority value, A value used to identify the
root bridge. The bridge with the lowest value has the
highest priority and is selected as the root. Enter a number
1 through 65535.
Max Age
You can change Max Age value, The number of seconds a
bridge waits without receiving. Spanning-Tree Protocol
configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
Hello Time
You can change Hello time value, the number of seconds
between the transmission of Spanning-Tree Protocol
configuration messages. Enter a number 1 through 10.
Forward
Delay time
You can change forward delay time, The number of
seconds a port waits before changing from its
Spanning-Tree Protocol learning and listening states to the