User`s manual

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver.A.3
Return to the catalogue.
22
4.2 Remote Network Management
4.2.1 IP Setting
You must setup the “IP Address” with the local serial console port (RS-232 Port), and then you can use this IP address to
control this VDSL IP DSLAM by Telnet and WEB. Or you can change your computer’s IP domain same with VDSL
NVF-800S. Then use the default IP address to control this VDSL IP DSLAM.
1. Remote control by “Telnet”
To enter Telnet, type the IP address of the IP DSLAM to connect management system. And type User name and
password.
Default User Name: admin
Default Password: 123
Note:
1. For security reason, we limit the user login number on Telnet and Console port. So you can’t login Telnet and Console
port at the same time. But you can login Telnet and Console port at the different time.
2. WEB Login doesn’t limit user login numbers.
When you want to close console port control you must log-out to leave. Otherwise you can’t login by Telnet.
2. Network control by “WEB”