User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

7.2.9.1 Settings

To enable or disable the UPnP Settings, click on the Settings link in the left navigation bar. A screen is displayed as

shown in Figure 7.2.9.1.

Figure 7.2.9.1 UPnP Configuration

The screen contains the following details:

Table 22 Fields in UPnP Settings

Field Description

Enable UpnP

To enable or disable UPnP Setting. Select the check box to

Enable or Disable the UPnP function of SPEED-VDSL2

CO&CP MODEM.

 Click CANCEL to exit from this page without saving the changes.

 Click APPLY at any time during configuration to save the information that you have entered.