User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9
Return to the catalogue.
The screen contains the following details:
Fields in Client Filter
Field Description
Enable Client Filter
Enable or disable the Client Filter feature of VDSL2
CO&CPE MODEM. Select the check box to enable this
option.
IP
Enter the filter IP Address range of the local machines
under VDSL2 CO&CPE MODEM.
Port
Enter the filter Port number range of the local machines
under VDSL2 CO&CPE MODEM.
Type
Select TCP or UDP to filter the protocol type packets
from the local machines.
Enable Provides more IP Addresses of the WAN interface.
• Click CANCEL to exit from this page without saving the changes.
• Click APPLY to save the information that has been entered.
63