User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

7.2.6.3 DMZ

To configure the DMZ, click on the DMZ link in the left navigation bar. A screen is displayed as shown in Figure 7.2.6.3:

Figure 7.2.6.3 DMZ Configuration

The screen contains the following details:

Fields in DMZ

Field Description

Enable

Enable or disable the DMZ setting of VDSL2 CO/CPE

MODEM. Select the check box to enable this option.

IP Address Enter IP Address of the DMZ host.

• Click CANCEL to exit from this page without saving the changes.

• Click APPLY to save the information that has been entered.