User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

7.2.6.2 Port Mapping

To configure Port Mapping, click on the Port Mapping link in the left navigation bar. A screen is displayed as shown in

Figure 7.2.6.2:

Figure 7.2.6.2 Port Mapping Configuration

The screen contains the following details:

Fields in Port Mapping

Field Description

Server IP Enter the IP Address of a specified local machine.

Mapping Port Assign a range of port or specific port number to route the packets.

Enabled Enable a specified entry of the Port Mapping.

• Click CANCEL to exit from this page without saving the changes.

• Click APPLY to save the information that has been entered.