User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9
Return to the catalogue.
7.2.6.1 Virtual Server
To configure virtual server, click on the Virtual Server link in the left navigation bar. A screen is displayed as shown in
Figure 7.2.6.1:
Figure 7.2.6.1 Virtual Server Configuration
The screen contains the following details:
Fields in Virtual Server
Field Description
Private IP Enter a private IP Address of specified entry.
Private Port Enter a private Port number of the specified entry.
Type Select virtual server protocol type of the specified entry.
Public Port Enter a public port number of the internet user to access the virtual server.
Enabled Enable the specified entry of the virtual server.
Click CANCEL to exit from this page without saving the changes.
Click APPLY to save the information that has been entered.
57