User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9
Return to the catalogue.
7.2.4.3 PPPoE
To configure the WAN interface to use PPPoE, click on the PPPoE link in the left navigation bar. A screen is displayed as
shown in Figure 7.2.4.3.
Figure 7.2.4.3 PPPoE Configuration
The screen contains the following details:
Fields in PPPoE
Field Description
User Name Enter a name to use the PPPoE session.
Password Enter the password of the login user.
Retype Password Enter the password again to reconfirm.
Service Name Enter a service name.
48