User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

7.2.4.2 Static IP

To configure the WAN interface to use a Static IP Address, click on the Static IP link in the left navigation bar. A screen is

displayed as shown in Figure 7.2.4.2.

Figure 7.2.4.2 Static IP Configuration

The screen contains the following details:

Fields in Static IP

Field Description

IP Address assigned by your ISP Enter the IP Address of VDSL2 CO/CPE MODEM.

Subnet Mask Enter the Subnet Mask of VDSL2 CO/CPE MODEM.