User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9
Return to the catalogue.
7.2.3.3 Device Mode
The ADM5120 network processor used in the reference system is able to act as either a switch or a router. Clicking on
Device Mode on the left navigation bar allows the user to change the mode of operation, as shown in the following figure.
Figure 7.2.3.3 Device Mode
The default setting is in Switch mode, it is not necessary to change the setting in most of the case. In situations, which
devices (e.g. PC, Server, VoIP) connected to CPE requires Router function, set the CPE on Router mode. Do NOT set
CO on Router mode to avoid the connection failure.
38