User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9
Return to the catalogue.
6.1.3 Profile Configuration
For this function, VDSL2 CO/CPE MODEM provides world wide telecom standard band plan, such as meet European
telecom standard band plan 998(17a), USA telecom standard band plan 997(8a, 8b) and Janpan Telecom standard band
plan (30a) etc. Annex A specifies bandplans for the North American region and enables VDSL2 CO/CPE MODEM to be
deployed with traditional POTS telephony or in an all-digital mode. Annex B specifies bandplans for Europe and enables
VDSL2 CO/CPE MODEM deployment with underlying POTS and ISDN services. Annex C allows VDSL2 CO/CPE MODEM
to coexist with TCM-ISDN services, found primarily in Japan.
VDSL2 CO/CPE MODEM has numerous configuration profiles and bandplans to meet regional service provider
requirements. The frequency bandwidth has increased to 30 MHz, with configuration options at 8.5 MHz, 12 MHz, 17.7 MHz
and 30 MHz.
Note : Please deactivate then activate once when any band profile is being changed. This version does not support ADSL band
profile, but will support that in the near future.
Figure 6.1.3 Profile Configuration
22