User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

6. Operating the VDSL2 System

After the VDSL2 system has been set up, you may want to configure the settings which are related to VDSL2.

Configuration of operation modes, test modes (loop back) and the display of status information is supported by an

graphical user interface.

6.1 Configuration Settings

Configure and start the VDSL2 CO MODEM and the VDSL2 CPE MODEM.

• Configuration: As a minimum configuration, usually selecting the bandplan is required.

See Chapter 6.1.3, Profile Configuration.

• Next, both sides should be activated from the web interface.

See Chapter 6.1.6, Line Activation

• The connection status of the link can be monitored.

See Chapter 6.2.1, Line Status