User`s manual

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

4.4.1 Select LAN Settings and set the IP Address

The form below is used to change the IP address of the LAN port “adm0” in the VDSL2 CO/CPE MODEM.

• The proposed IP address either is the default address of adm0 or it is the address changed by an ifconfig

command via the shell running in the terminal.

• The Subnet Mask display can be ignored.

• In case the DHCP checkbox is checked, some additional data and options will be on display (see Chapter

7.2.4.1 on Page 45). The DHCP server is not required to work with VDSL2 in a lab environment. It is

recommended to uncheck the box if it is not unchecked already.

Figure 4.4.1 LAN Settings