User manual

Dynamix DW-Phone LP-201 SIP IP Phone
User Manual
2.Back View
♦ DC 9V: DC 9V power input outlet
♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5
cable.
♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
♦ Line: RJ-11 connector, connected directly to the PSTN analog line.
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is regular, LED of LINK/ACT will light on; when Dynamix DW-
Phone LP-201 is transmitting or receiving data, LED will be flashing; when transmit rate
is in 10 mbps or 100mbps, LED of 10/100 will light off or light on.
3.Specification of connector
1 Ethernet Port：
Ethernet port is for connecting Dynamix DW-Phone LP-201 to network, transmit rate
supports 10/100 Base-T.
Ethernet connector（LAN）
9